FS750T Smart Switch Software Release Notes Software Version 1.1.0
Enhancements
- Add Port Monitoring (Mirroring) capability. With Port Mirroring, you can connect a network analyzer to a mirroring port and get all the traffic to and from a mirrored port for analysis.
Installation Procedure (also located in your documentation)
1. Download the new firmware and stored into a known location in your local system (e.g., download) which you will need in the next step.
2. Start Smartwizard Discovery utility, which is included on the CD that came with your Smart Switch. If you have not installed, please install it.
3. On Smartwizard Discovery window, click Discover to locate your Smart Switch. The switch will be listed in the device list table once it is found. (Note: Smartwizard Discovery uses broadcast packet to locate Smart Switches. This means that it can only locate Smart Switches located within the same routing domain)
4. Highlight the Smart Switch to upgrade and click “Firmware Upgrade” and follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end of update.
(To install the wizard, unzip the file to a convenient place, and run setup.exe.)
File Size:
637 KB
Software File Size:
1.2 MB
Date Published:
April 22, 2004
Doc:
D102422.htm April 22, 2004
Try searching for a symptom, or a technical term.
Manuals, software and firmware are not searchable.
- smart switch
- no internet connection
- firewall
|
